Parmar Eurotech

Welcome to World of Light

Octagonal Poles
We have introduced hot dip galvanized Octagonal Ples, which can use in different sector for power transmission & distribution, road & Building and various other applications.In general, these poles are hot dip galvanised after fabrication, internally and externally in accordance with IS-2629/BSEN ISO 1461 or equivalent.

Material Specification :
The steel generally used to manufacture steel poles is as per BSEN 10025.
Yield Strength Min 355N/mm2
Tensile Strength 490-630N/mm2

Octagonal Poles

Standard Specification for Octagonal Poles :

Pole Type	Height(mtr.)	Top Dia (A/F)mm	Bottom Dia (A/F)mm	Sheet Thickness	Base Plate (LxWxT)	Pitch Circle	Foundation Bolt (No. x Dia x mm)
PM - 3030	3	60	130	3	200 x 200 x 12	200	4 x 16 x 450
PM - 3031	3	70	130	3	200 x 200 x 12	200	4 x 16 x 450
PM - 4030	4	60	130	3	200 x 200 x 12	200	4 x 16 x 450
PM - 4031	4	70	130	3	200 x 200 x 12	200	4 x 16 x 450
PM - 5030	5	60	130	3	200 x 200 x 12	200	4 x 16 x 450
PM - 6030	6	60	130	3	220 x 220 x 12	220	4 x 20 x 600
PM - 6031	6	70	135	3	220 x 220 x 12	220	4 x 20 x 600
PM - 7030	7	60	130	3	220 x 220 x 12	220	4 x 20 x 600
PM - 7030	7	70	135	3	220 x 220 x 12	220	4 x 20 x 600
PM - 8030	8	70	135	3	220 x 220 x 16	220	4 x 20 x 600
PM - 8031	8	70	155	3	225 x 225 x 16	220	4 x 20 x 700
PM - 9030	9	70	155	3	260 x 260 x 16	220	4 x 24 x 750
PM - 9031	9	70	175	3	260 x 260 x 16	250	4 x 24 x 750
PM - 1030	10	70	155	3	260 x 260 x 16	250	4 x 24 x 750
PM - 1031	10	70	175	3	275 x 275 x 16	270	4 x 24 x 750
PM - 1130	11	90	210	3	300 x 300 x 20	300	4 x 24 x 750
PM - 1230	12	90	240	3	320 x 320 x 20	310	4 x 24 x 850

Pole Type	Height(mtr.)	Top Dia (A/F)mm	Bottom Dia (A/F)mm	Sheet Thickness	Base Plate (LxWxT)	Pitch Circle	Foundation Bolt (No. x Dia x mm)
PM - 3030	3	65	98	3	200 x 200 x 12	200	4 x 16 x 450
PM - 4030	4	65	108	3	200 x 200 x 12	200	4 x 16 x 450
PM - 5030	5	65	119	3	200 x 200 x 12	200	4 x 16 x 450
PM - 6030	6	65	130	3	200 x 200 x 12	220	4 x 16 x 600
PM - 7030	7	65	130	3	200 x 200 x 12	220	4 x 16 x 600

Tubular Swaged Poles
Swaged poles are manufactured from E.R.W./Welded tubes of sutable lengths swaged & joined together. No circumerential joint shall be permitted in the individubual tube of poles. The longitudinal welds shall be stagered at each swaged joint.Swaging is done by hydraulic power pack unit.A circumferential weld shall be deposit at the upper end of the joint at aslope of approximately 45 poles are manufactured by us normally conform to as per IS 2713(P-III) - 1980 and special sizes poles can also be manufactured by as per customer drawings or requirements.

Earthing Arrangement :

If earthing arrangement is required, a bolt of 10mm dia is welded on each pole at a height of 300mm above the planting depth or can be provided as per customers requirements.

Lightining Pole